# MULTIOBJECTIVE OPTIMAL DESIGN OF STRUCTURE AND CONTROL OF A CONTINUOUSLY VARIABLE TRANSMISSION

### Jaime Alvarez-Gallegos, Carlos A. Cruz-Villar, Edgar A. Portilla-Flores

#### 2005

#### Abstract

An approach to solve the mechatronic design problem is to formulate the problem as a multiobjective dynamic optimization problem (MDOP), where kinematic and dynamic models of the mechanical structure and the dynamic model of the controller are considered besides a set of constraints and a performance criteria. This design methodology can provide a set of optimal mechanical and controller parameters so that the desired dynamic behavior and the performance criteria are satisfied. In this paper a MDOP is proposed and applied to a continuously variable transmission (CVT). Performance criteria are the mechanical efficiency and the minimal controller energy. The goal attainment method and a sequential approach are used to solve the MDOP.

#### References

- Alvarez-Gallegos, J., Cruz-Villar, C., and Portilla-Flores, E. (2005). Parametric optimal design of a pinionrack based continuously variable transmission. In IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Accepted paper).
- Betts, J. (2001). Practical Methods for Optimal Control using Nonlinear Programming. SIAM, Philadelphia, USA, 1st edition.
- De-Silva, C., Schultz, M., and Dolejsi, E. (1994). Kinematic analysis and design of a continuously variable transmission. In Mech. Mach. Theory, Vol 29, No. 1 pp. 149-167. PERGAMON Press.
- Goh, C. and Teo, K. (1988). Control parametrization: a unified approach to optimal control problems with general constraints. In Automatica, Vol 24, No. 1 pp. 3-18. Pergamon Journals Ltd.
- Li, Q., Zhang, W., and Chen, L. (2001). Design for control-a concurrent engineering approach for mechatronic systems design. In Transactions on Mechatronics, Vol 6, No. 2 pp. 161-168. IEEE/ASME.
- Liu, G. P., Yang, J., and Whidborne, J. (2003). Multiobjective Optimisation and Control. Research Studies Press LTD., Baldock, Hertfordshire, England, 1st edition.
- Norton, R. (1996). Machine Design, An integrated approach. Prentice Hall Inc., Upper Saddle River, NJ 07458, 1st edition.
- Osyczka, A. (1984). Multicriterion optimization in engineering. John Wiley and Sons., 605 Third Avenue, New York, N.Y. 10016, USA., 1st edition.
- Papalambros, P. and Wilde, D. (2000). Principle of optimal design. Modelling and computation. Cambridge University Press, The Edinburg Building, Cambridge CB2 2RU, UK, 1st edition.
- Setlur, P., Wagner, J., Dawson, D., and Samuels, B. (2003). Nonlinear control of a continuously variable transmission (cvt). In Transactions on Control Systems Technology, Vol 11, pp. 101-108. IEEE.
- Shafai, E., Simons, M., Neff, U., and Geering, H. (1995). Model of a continuously variable transmission. In First IFAC Workshop on Advances in Automotive Control, pp. 575-593.
- Spotts, M. (1964). Mechanical Design Analysis. Prentice Hall Inc., Englewood Cliffs, N.J., 1st edition.
- van Brussel, H., Sas, P., NĂ©meth, I., Fonseca, P. D., and van den Braembussche, P. (2001). Towards a mechatronic compiler. In Transactions on Mecatronics, Vol 6, No. 1 pp. 90-104. IEEE/ASME.
- Zhang, W., Li, Q., and Guo, L. (1999). Integrated design of a mechanical structure and control algorithm for a programmable four-bar linkage. In Transactions on Mechatronics, Vol 4, No. 4 pp. 354-362. IEEE/ASME.

#### Paper Citation

#### in Harvard Style

Alvarez-Gallegos J., A. Cruz-Villar C. and A. Portilla-Flores E. (2005). **MULTIOBJECTIVE OPTIMAL DESIGN OF STRUCTURE AND CONTROL OF A CONTINUOUSLY VARIABLE TRANSMISSION** . In *Proceedings of the Second International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,* ISBN 972-8865-29-5, pages 154-160. DOI: 10.5220/0001185001540160

#### in Bibtex Style

@conference{icinco05,

author={Jaime Alvarez-Gallegos and Carlos A. Cruz-Villar and Edgar A. Portilla-Flores},

title={MULTIOBJECTIVE OPTIMAL DESIGN OF STRUCTURE AND CONTROL OF A CONTINUOUSLY VARIABLE TRANSMISSION},

booktitle={Proceedings of the Second International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},

year={2005},

pages={154-160},

publisher={SciTePress},

organization={INSTICC},

doi={10.5220/0001185001540160},

isbn={972-8865-29-5},

}

#### in EndNote Style

TY - CONF

JO - Proceedings of the Second International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,

TI - MULTIOBJECTIVE OPTIMAL DESIGN OF STRUCTURE AND CONTROL OF A CONTINUOUSLY VARIABLE TRANSMISSION

SN - 972-8865-29-5

AU - Alvarez-Gallegos J.

AU - A. Cruz-Villar C.

AU - A. Portilla-Flores E.

PY - 2005

SP - 154

EP - 160

DO - 10.5220/0001185001540160