TOOL PATH PLANNING IN FLANK MILLING BASED ON DUAL SPHERICAL SPLINE
Yayun Zhou, Jörg Schulze, Stefan Schäffler
2011
Abstract
The flank milling (side milling) method, which uses the manufacturing tool side to remove material, is widely used in industry to manufacture ruled surfaces. Ruled surfaces are often used in blade design considering the aerodynamics requirements and the manufacture cost. A common way to derive a flank millable blade surface is to adopt a certain ruled surface approximation algorithm before the surface is delivered to the manufacturer. In this paper, a new tool path planning approach is proposed based on the offset theory and the kinematic ruled surface approximation. The novelty of this approach is to denote the drive surface as a dual spherical spline, which is a new ruled surface representation. This drive surface is derived by kinematically approximating the offset surface of the original design as a ruled surface. Therefore, the designed blade surface is represented as a flank milling tool path with a cylindrical cutter in CNC machining. This approach delivers more accuracy compared with convectional tool position optimization methods. By integrating the manufacture requirements into the design phase, this approach also reduces the developing cycle time and the manufacturing cost.
DownloadPaper Citation
in Harvard Style
Zhou Y., Schulze J. and Schäffler S. (2011). TOOL PATH PLANNING IN FLANK MILLING BASED ON DUAL SPHERICAL SPLINE . In Proceedings of the International Conference on Computer Graphics Theory and Applications - Volume 1: GRAPP, (VISIGRAPP 2011) ISBN 978-989-8425-45-4, pages 5-12. DOI: 10.5220/0003274600050012
in Bibtex Style
@conference{grapp11,
author={Yayun Zhou and Jörg Schulze and Stefan Schäffler},
title={TOOL PATH PLANNING IN FLANK MILLING BASED ON DUAL SPHERICAL SPLINE},
booktitle={Proceedings of the International Conference on Computer Graphics Theory and Applications - Volume 1: GRAPP, (VISIGRAPP 2011)},
year={2011},
pages={5-12},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0003274600050012},
isbn={978-989-8425-45-4},
}
in EndNote Style
TY - CONF
JO - Proceedings of the International Conference on Computer Graphics Theory and Applications - Volume 1: GRAPP, (VISIGRAPP 2011)
TI - TOOL PATH PLANNING IN FLANK MILLING BASED ON DUAL SPHERICAL SPLINE
SN - 978-989-8425-45-4
AU - Zhou Y.
AU - Schulze J.
AU - Schäffler S.
PY - 2011
SP - 5
EP - 12
DO - 10.5220/0003274600050012