Characterization of Repeatability of XY-Theta Platform Held by Robotic Manipulator Arms using a Camera
Anas Hijazi, Dimitri Lefebvre, Jean-François Brethe
2014
Abstract
This paper presents a XY-Theta micrometric platform, which is extremely compact and offers a wide 300 x 300 mm workspace. This platform is held by a serial kinematic chain of four revolute joints, constituting a redundant robot. Each point of the horizontal platform can be positioned under a vertical axis in a two-step approach: in a coarse positioning mode, the four axes are controlled to position and orientate the object with a position error less than 7 μm; in a fine mode, two axes are mechanically blocked while two others are controlled to reduce the final position error below 2 μm. The choice of the blocked and moving axes depends on the lever arm length and the mechanism is designed to optimize the link lengths to reduce the final position error. The aim of the paper is to characterize the platform repeatability performances. An estimation of the repeatability is performed with a camera. These results are then compared to previous results based on the stationary cube method. The two measurements methods lead to similar results with a repeatability close to 2 μm showing a significant improvement of the performances.
DownloadPaper Citation
in Harvard Style
Hijazi A., Lefebvre D. and Brethe J. (2014). Characterization of Repeatability of XY-Theta Platform Held by Robotic Manipulator Arms using a Camera . In Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-758-040-6, pages 421-427. DOI: 10.5220/0005056104210427
in Bibtex Style
@conference{icinco14,
author={Anas Hijazi and Dimitri Lefebvre and Jean-François Brethe},
title={Characterization of Repeatability of XY-Theta Platform Held by Robotic Manipulator Arms using a Camera},
booktitle={Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2014},
pages={421-427},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005056104210427},
isbn={978-989-758-040-6},
}
in EndNote Style
TY - CONF
JO - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - Characterization of Repeatability of XY-Theta Platform Held by Robotic Manipulator Arms using a Camera
SN - 978-989-758-040-6
AU - Hijazi A.
AU - Lefebvre D.
AU - Brethe J.
PY - 2014
SP - 421
EP - 427
DO - 10.5220/0005056104210427